How To Thread A Sewing Machine in 9 Steps
At first, threading the sewing machine be seem tough, if not beyond the impossible to master on the first try. However, once you find out How To Thread A Sewing Machine, the whole procedure is only going to be a few second of your time. In a little bit of time, you will get on your way to make a lot of different sewing projects.
One thing we have found out in the process is that it does take good eyesight. It also takes steady and aiming to acquire the goal.
If you wear glasses, its important to make sure you wear them, because you will need to be able look closely. Below, we are going to give you some easy to follow steps on threading that sewing machine.
1. Turn the handwheel toward you and pull the metal needle toward the highest possible position.
2. Now, put your attention on the presser foot and raise it. This is going to allow your thread to pass through those threading points. Also, when you begin to stitch, it is going to prevent the needle from being unthreaded.
3. Get a spool of thread and apply it to the spool pin. The spool pin can be found at the top of the sewing machine. If it is running horizontally, then secure the thread with a cap that should be provided.
4. Grab the thread gently and push it through the desired threading points at the top of the equipment casing and then down around the tension gadget. Where is the tension gadget assembly? It can be found on the left f the machine. It is what the controls that help provide the flow with ease as you start sewing.
5. Pull the piece of thread and place it on the bottom of the tension gadget and then back up to the next point, which is on the left top of the machine.
6. Push your thread through the lever, which is also at the left top of the machine. Bring it down to the threading points located at the bottom left.
7. Now, it is pull the thread to the back or front. The direction that you thread it is all going to depend on the type of machine you have.
8. Pull a couple of inches through your needle. After this, pull the string to the left.
9. If necessary, place a wound bobbin in the machine and then turn to the throat plate and close it. You should pull a couple of inches of placing the bobbin thread to the right coming from under the throat plate.
Those are nine easy steps on How To Thread A Sewing Machine. Once you get it down pat, it will be easy and will take no time.
